Description
3 Mil Letter Laminating Pouches 3mil 9" x 11-1/2" (230mm x 293mm)
HOP thermal laminating pouches are compatible with all popular laminating machine models, including laminators from TruLam, Akiles, Sircle, Tamerica, Banner, Purple Cows GBC, Fellowes, and Scotch.
These laminating sheets are made of high quality, high clarity laminating film and premium adhesive resins for crystal clear laminated documents. To use, simply center your document inside of the laminating pouch and insert it into a pre-heated pouch laminator (following the manufacturer's instructions for setting the machine based on the thickness of the pouch).
LP 3mil 9" x 11-1/2" (230mm x 293mm)
FEATURES
Finish: Clear
Corners: Rounded
Pouch sealed on shorter side
Includes 2 Carriers
Quantity: 100 per box
Helpful Hints:
We include carrier sheets with every box of laminating pouches, but not every laminator requires them. As a general guideline, laminators that have silicone rollers do not need a carrier sheet, however you should refer to the operation manual for your specific model to determine whether or not it requires a carrier for proper operation.
In order to create a lasting seal, you must leave a minimum border of 1/8" on all sides of your document. Trimming the pouch flush to the insert document will expose the edges of the paper and will lead to delamination over time.
Our standard pouches are ideal for use on prints with light-to-medium ink coverage. For documents that have medium-to-full coverage or are printed with oil-based toners, we recommend DIGIKote laminating pouches. DIGIKote laminating pouches offer a more aggressive adhesive and activate at a lower temperature to protect prints from heat damage.
If the pouch still appears cloudy after lamination, then the temperature needs to be increased. Working in small increments, increase the laminating temperature in stages until the pouch is completely clear and flat. You can run a cloudy pouch through your laminator more than once in order to fully activate the adhesive without damaging the pouch or the insert document.
If the pouch has a warped or wavy appearance after lamination, then the temperature is set too high and needs to be decreased. After adjusting the temperature, allow the laminator to cool for a few minutes to ensure that it has reached the specified temperature before inserting a new pouch.COVID Supply Chain Warning Due to global challenges including COVID and Climate Change affecting all businesses, prices are subject to change because of supply chain disruptions, shipping delays, labor shortages, material shortages, and inflationary pressures. If you place an order, and there is an increase in a price from that shown, we will alert you before processing the order.
