Description

M.C Mieth MULTIPLE CHARACTER & LARGE ROUND HOLES Punch #448RH 1-1/8 Inch Reach 3/8, 1/2, 5/16 or 7/16 Inch Diameter Holes

This item page is to order the Mieth Punch Model # 448 Large Round Hole Punch makes 3/8", 1/2", 5/16" or 7/16" Diameter Holes. Choose the character size you want to punch - either 3/8, 1/2, 5/16, or 7/16 Inch Diameter. Use the Drop-down menu below the price on the upper right side of this page to select the character size you want.

The Mieth 448 Large Round Hole Punch is a custom-designed two-piece, solid steel, nickel-plated, single-hole, or multiple-character punch.

The 448 is designed for heavy-duty punching of large-size holes, single characters, or when your requirements call for two or more characters, letters, numbers, figures or combinations of letters and figures in one punch. Each punch is built to order and requires up to three weeks for fabrication.

Indicate the numbers and/or letters you want in the Special Instructions section of the order process.

You can put your own Design on most of our Punches. CALL FOR SPECIAL PRICING.

Punching Specifications for M.C. Mieth Large Round Holes Punch Model #448

Round Holes : 3/8", 1/2", 5/16" or 7/16"

Round Hole Sizes

Two character figures 10 to 99 or a combination of 1 figure and 1 letter- B2, B3, etc...1/8", 3/16" or 1/4" size
Click to Order Two Character combination of Letter and/or Number Punch

Three character combinations- letters and/or figures- 1/8" or 3/16" size
Click to Order Three Character combination of Letter and/or Number Punch

Four character combinations- letters and/or figures- 1/8" size
Click to Order Four Character combination of Letter and/or Number Punch

Security Chains, Leather Holsters, Finger Rings, Reservoirs to Capture Punch Chits, and Holes in the Handle of Punches for attachments are available on all M.C. Mieth punches. To order you can use the Accessories Tab above.

Design for minute sheet punching cuts 1/4" from edge for a minute sheet use.

Net Weight: 1 lbs.

Shipping Weight: 2 lbs

Made for punching paper, light card stock, and thin plastic (up to 0.012'' plastic).

We recommend the Long Handle Accessory LH for extra leverage when Punching thick paper or plastic cards up to 30 mm. This is another punch, please contact us for information:sales@jhfinch.com

In All Punches with 2, 3, or 4 characters, the characters are placed on the long axis of the Punch itself. To do your punching, Come in from the side of the material with the Punch.

M.C. Mieth follows the strictest rules of highest quality and finish. For every marking application, whether for identification or canceling, you can Punch Mark it faster with non-removable, easily-read Punched Symbols, Letters, or Figures. The quick operation and mistake-proof results of Punch Marking are utilized in hundreds of Industries on the production line and in the office. In addition to punching paper and cards, punches can be made for light metal, plastic, rubber sheeting, cloth, or film negatives.

Six Reasons Why M.C. Mieth Handheld Hole Punches Mark Faster and Easier:

Finish: Heavy Nickel Plate Buffed to a High Luster.

Clear Cutting Hardened Steel Die Made with Extreme Accuracy.

Easy Action Release Spring.

Malleable Iron Casting.

Hard Steel Pivot Pin( Lubricated for the Life of the Hole Punch)

All Finger Rings are welded to the handle(Finger Rings come with some Hole Punches and are Optional on others.)

Warranty
M. C. Mieth punch products have a one-year limited warranty against any defects in material or workmanship. Not guaranteed against wear. Any alterations to the product void the warranty.The unit must be returned to factory if service is required..

COVID Supply Chain Warning Due to global challenges including COVID and Climate Change affecting all businesses, prices are subject to change because of supply chain disruptions, shipping delays, labor shortages, material shortages, and inflationary pressures. If you place an order, and there is an increase in a price from that shown, we will alert you before processing the order.