Description

M. C. Mieth Model 45 Single Number or Letter Loyalty Hand Punch 1/8", 3/16" or 1/4" Size and a 1" Reach

In the Attachment Tab above is a sheet you can look at and print out showing the diameters of holes you can punch if you print the sheet out - actual size on your printer. The sheet will help you to choose the correct size of the hole diameter you want. If you order the wrong size and you need to exchange the punch, there will be a charge of $20 + shipping or up to 25% of your order cost.

This item page is for ordering the Mieth 45 Single Number or Letter in either a 1/4", 1/8" or 3/16" Size.. Choose any letter or number and denote choice and size in the Special Instructions Field in your order. Also enter the size of the Number or Letter in the Drop Down Menu below the Price shown on the upper right of this page.

The Mieth 45 is a custom designed two piece solid steel nickel plated single hole punch. The 45 can punch round holes, single numerals, or single letters.See below for the capabilities and specifications for the Mieth 45. Each punch is built to order and requires up to three weeks for fabrication. The 45 has a 1" Reach or Throat.

Punching Capabilities and Specifications for M.C. Mieth 45 Punch

Round Holes: 1/8", 3/16", 1/4"
Click to Order Round Hole Punch

Limited selection assorted designs or slit hole for prong fasteners
Click to Order Limited selection assorted designs or Slit Hole

Single figure characters 0 to 9 or letter characters A to Z- 1/8", 3/16" size and 1/4" size letters.

Full selection assorted designs
Click to Order Full selection assorted designs

Security Chains, Leather Holsters, Finger Rings, Reservoirs to Capture Punch Chits, and Holes in the Handle of Punches for attachments are available on all M.C. Mieth punches. To order you can use the Accessories Tab above.

REACH: 1"

LENGTH: 4-3/4"

NET WEIGHT : 1/2 lbs.

SHIPPING WEIGHT : 1 lbs

Please Specify which DIE Format is desired, whether it be a Figure or a Letter, Number Combination

M.C. Mieth follows the strictest rules of highest quality and finish. For every marking application, whether for identification or cancelling, you can Punch Mark it faster with non-removable, easily read Punched Symbols, Letters or Figures. The quick operation and mistake proof results of Punch Marking is utilized in hundreds of Industries on the production line and in the office. In addition to punching paper and cards, punches can be made for light metal, plastic, rubber sheeting, cloth or film negatives.

Six Reasons why M.C. Mieth Handheld Hole Punches Mark Faster and Easier:

Finish: Heavy Nickel Plate Buffed to a High Luster.

Clear Cutting Hardened Steel Die Made with Extreme Accuracy.

Easy Action Release Spring.

Malleable Iron Casting.

Hard Steel Pivot Pin( Lubricated for the Life of the Hole Punch)

All Finger Rings are welded to the handle(Finger Rings come with some Hole Punches and are Optional on others.)

Warranty
M. C. Mieth punch products have a one year limited warranty against any defects in material or workmanship. Not guaranteed against wear. Any alterations to product voids warranty.Unit must be returned to factory if service is required..



If you have any questions or concerns, contact a customer service representative today.
Phone: 877.336.6877 Visit: www.officeequipmentmachineshop.com

COVID Supply Chain Warning Due to global challenges including COVID and Climate Change affecting all businesses, prices are subject to change because of supply chain disruptions, shipping delays, labor shortages, material shortages, and inflationary pressures. If you place an order, and there is an increase in a price from that shown, we will alert you before processing the order.