Description

Lassco EBM-2.1 One Spindle E-Z Glide Table-Top Bench Model 2 Inch Drilling Capacity Paper Drill

The Lassco EBM-2.1 Table Top Paper Drill or Bench Paper Drill is the Lassco EBM-2 improved with the E-Z Glide table system that uses pattern bars which allows for quick movement from hole to hole for multi-hole drilling. The bench model, table top design makes it easy to place the unit almost anywhere in your workspace. A release lever is positioned on each side of the traversing table for right or left-handed operation.

FEATURES

An adjustable side stops allow you to trap your product to prevent misalignment!

Easy to set up and use with minimal installation necessary.

SPECIFICATIONS

Table size: 18 x 12 Inches

Base Footprint: 12 x 13 1/2 Inches

Table Height: 3 1/2 Inches

Maximum Drilling Capacity: 2 Inches

Motor: 1/4 Horse Power, 115 Volts

Actual Weight: 66 lbs.

Shipping Weight: 104 lbs.

Shipping dimensions: 35 x 25 x 23 inches

Ships via: LTL Truck

Included with the EMB-2.1 Table -Top Paper Drill are:

A Sharpening Stone

A Chip Clearer

A 1 ounce Bottle of Spin-Eze Drill Bit Lubricant

A 5/16" Diameter Paper Drill Bit, and

Four patterns for multi-hole drilling. The sizes are as follows:

Blank (customizable)
3 holes, 2-3/4" apart center to center
3 holes, 3-1/2" apart center to center
2 holes, 2-3/4" apart center to center
3 holes, 4-1/4" apart center to center

ACCESSORIES

Drill Strips

Style A - 2 Inch capacity Hollow Paper Drill Bits

Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a Drill Bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip. (Once a Drill Bit has a flared tip, it becomes defective.) Three types of Drill Sharpeners are available. We recommend you purchase a sharpener and also an extra Drill Bit for each size that you use to insure you can finish a job in the event a Drill Bit breaks. USE A SHARPENING STONE to debur the outside cutting edge of the your Drill Bits for better performance. LUBRICATE DRILL BITS OCCASSIONALLY - use Drill-Ease or Spin-Eze. While the drill is running, simply touch the Drill-Ease stick to the Drill Bit or brush on the Spin-Eze. This will allow for a smoother cut. USE DRILL BLOCKS. When drilling, a Drill Bit must stop slightly above the drill block when lowered. Replace worn out drill blocks regularly to ensure proper drilling.

COVID Supply Chain Warning Due to global challenges including COVID and Climate Change affecting all businesses, prices are subject to change because of supply chain disruptions, shipping delays, labor shortages, material shortages, and inflationary pressures. If you place an order, and there is an increase in a price from that shown, we will alert you before processing the order.