Lassco FMMS-3 Three (3) Spindle, Fixed Heads Manual Lift 2 Inch Capacity Paper Drill
Lassco FMMS-3 Three Spindle, Fixed Heads Manual Lift 2 Inch Drill Capacity Paper Drill
The Lassco Spinnit FMMS-3 Paper Drill is identical to the FMM-3 except it has Stationary Drill Heads set for drilling three holes 4 1/4" center-to-center.
All floor model drills include:
Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a drill bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the bit unusable. Sharpening stones are also recommended to debur the outside cutting edge of the your drill bits for better performance. Use of Drill-Ease or Spin-Eze lubricant is required. Finally, purchase drill blocks to stop the drill bit after it penetrates the drilled material.
COVID Supply Chain Warning Due to global challenges including COVID and Climate Change affecting all businesses, prices are subject to change because of supply chain disruptions, shipping delays, labor shortages, material shortages, and inflationary pressures. If you place an order, and there is an increase in a price from that shown, we will alert you before processing the order.
|Manufacturer Part #:
|26.00in. x 32.00in. x 52.00in.
|United States of America
ReviewsBe the first to write a review for Lassco FMMS-3 Three (3) Spindle, Fixed Heads Manual Lift 2 Inch Capacity Paper Drill.