Lassco Spinnit HL-3 Three (3) Spindle Hydraulic Lift Paper Drill

Quantity:

MSRP:
$7,345.00

Price You Pay:

$6,975.00
Yes! This Item Is In Stock!
International & Domestic Shipping Info
Availability
Online
In Store
Same Day

Description

This Machine Has Been DISCONTINUED, It Has Been REPLACED By The FMMH-3.1 Paper Drill Which Can be Found On Our Site As Item# 146511 As Well As The Entire CURRENT Lassco Line. Please contact us for any questions.



Lassco Spinnit HL-3 Three Spindle Hydraulic Lift Paper Drill



The Lassco HL-3 (Hydraulic Lift - 3 Spindle) Paper Drill is a fully automatic hydraulic lift paper-drilling machine. It has an adjustable 2" or 2-1/2" drilling capacity and foot pedal control. The Lassco HL-3 Paper Drill has a powerful 1 HP spindle motor.

Features

  • Adjustable hydraulic lift speeds
  • Easy set up for drill depth adjustment
  • Three spindles with a 2-1/2 inch drilling capacity
  • Fully automatic 1 HP hydraulic lift with foot pedal activation
  • Powerful 1 HP spindle motor
  • Sturdy adjustable back-gauge

    Specifications

  • Table size: 17 x 32 inches
  • Base footprint: 18 x 22 inches
  • Table height: 36 inches
  • Overall height: 56 inches
  • Overall width: 32 inches
  • Overall depth: 31 inches
  • Max strokes per minute: 20
  • Motor: 1 HP, 60 Hz, single phase 208/230 Volts, 7 Amps
  • Receptacle required: NEMA L6-30R
  • Actual weight: 510 lbs.
  • Shipping weight: 640 lbs.
  • Shipping dimensions: 48 x 40 x 60 inches
  • Ships via: LTL Truck

    Optional

    Two hand push button controls

    Accessories

  • Additional side guide
  • Drill strips
  • Hydrol HL hydraulic oil (15 liters)
  • Style H hollow drill bits

    All floor model drills include:

    MS-1 drill sharpener
    Spin-Eze drill bit lubricant
    Set of 5/16 inch drill bits
    Sharpening stone
    Chip clearer

    Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a Drill Bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip. (Once a Drill Bit has a flared tip, it becomes defective.) Three types of Drill Sharpeners are available. USE A SHARPENING STONE to debur the outside cutting edge of the your Drill Bits for better performance. LUBRICATE DRILL BITS OCCASSIONALLY - use Drill-Ease or Spin-Eze. While the drill is running, simply touch the Drill-Ease stick to the Drill Bit or brush on the Spin-Eze. This will allow for a smoother cut. USE DRILL BLOCKS. When drilling, a Drill Bit must stop slightly above the drill block when lowered. Replace worn out drill blocks regularly to ensure proper drilling.

    • Specifications

    Manufacturer Part #: HL3
    Dimensions (LxWxH): 17.00in. x 38.00in. x 56.00in.