Description

M. C. Mieth 464RH 2 Inch Reach 1/8, 3/16, 1/4 or 5/16 Inch Diameter Round Hole Punch

This item page is to order the Mieth 464RH Round Hole Punch. Choose the size hole you want to punch - either 1/8, 3/16, 1/4, or 5/16 Inch Diameter. Use the Drop-down menu below the price on the upper right side of this page to select the hole size you want.

The Meith 464RH is a sturdy tool used in mills and canneries for punching piecework and time cards. This 464RH M.C. Mieth Handheld Hole Punch has a 2-inch reach or throat. It can punch up to two inches from the edge of the card,

The 464 has a wide range of punching capabilities as explained below. It can be fitted to punch round holes, as on this item page - and also numbers, letters, or shapes/characters.

Indicate the numbers and/or letters you want in the Special Instructions section of the order process.

You can put your own design on most of our Punches. CALL FOR SPECIAL PRICING.

Punching Capabilities and Specifications for the M.C. Mieth 464 Punch

Round Holes: 1/8", 3/16", 1/4" 5/16" or 3/8"

Round Hole Sizes

Single figure characters 0 to 9 or letter characters A to Z- 1/8", 3/16" or 1/4" size.
Click to Order Single Letter or Number Punch

2 character combination of letters as "VC", "BP" etc or Numbers as "10" to "99" etc - 1/8" or 3/16" size
Click to Order 2 Character combination of Letter and/or Number Punch

3 character combination of letters as " AMB", "SRY" etc or Numbers as "100", "999" etc - 1/8" size only
Click to Order 3 Character combination of Letter and/or Number Punch

Full selection custom designs
Click to Order Single Number or Letter Punch

Security Chains, Leather Holsters, Finger Rings, Reservoirs to Capture Punch Chits, and Holes in the Handle of Punches for attachments are available on all M.C. Mieth punches. To order you can use the Accessories Tab above.

REACH: 2"

LENGTH: 4-7/8"

Net Weight: 1 lbs.

Shipping Weight: 2 lbs

All Punches with 2 or 3 characters, the characters are placed on the long axis of the Punch itself. To do your punching, Come in from the side of the material with the Punch.

ACCESSORIES

Leather Holster for Handheld Hole Punches
3ft (36 Inches) Security Chain with S-Hooks on both ends for Handheld Hole Punches
Reservoir for Handheld Hole Punches


The M.C. Mieth Line of Handheld Hole Punchers is constantly being studied for improvement in every way possible. M.C. Mieth follows the strictest rules of highest quality and finish. For every marking application, whether for identification or canceling, you can Punch Mark it faster with non-removable, easily-read Punched Symbols, Letters, or Figures. The quick operation and mistake-proof results of Punch Marking are utilized in hundreds of Industries on the production line and in the office. In addition to punching paper and cards, punches can be made for light metal, plastic, rubber sheeting, cloth, or film negatives.

Six Reasons Why M.C. Mieth Handheld Hole Punches Mark Faster and Easier:

Finish: Heavy Nickel Plate Buffed to a High Luster.

Clear Cutting Hardened Steel Die Made with Extreme Accuracy.

Easy Action Release Spring.

Malleable Iron Casting.

Hard Steel Pivot Pin( Lubricated for the Life of the Hole Punch)

All Finger Rings are welded to the handle(Finger Rings come with some Hole Punches and are Optional on others.)

Warranty
M. C. Mieth punch products have a one-year limited warranty against any defects in material or workmanship. Not guaranteed against wear. Any alterations to the product void the warranty.The unit must be returned to factory if service is required..

COVID Supply Chain Warning Due to global challenges including COVID and Climate Change affecting all businesses, prices are subject to change because of supply chain disruptions, shipping delays, labor shortages, material shortages, and inflationary pressures. If you place an order, and there is an increase in a price from that shown, we will alert you before processing the order.