Description

Rena Jet1 Mail Tabber Labeling Machine

Mail Tabber / Labeler / Post-It Note Affixer / Stamp Affixer

Meet all your requirements for tabbing, labeling, stamp or decal affixing with the Ameritek Jet1 Tabber. Easy to set up and operate in-line or off-line with the highest productivity for today's mailing professionals. Its superb design and engineering combined with Ameritek's first class support insures your company years of reliable production.

Upgradeable to wide format.
Handles a wide variety of media.
Works in-line with inkjet addressing systems easily.
All U.S.P.S. formats supported.
In-line dual tabbing solution will accommodate the two tab / one tab requirement for the leading and trailing edges for automation compatible letter-sized booklet mail.

New USPS Tabbing Requirements and Solution
The new booklet tabbing rules require two 1-1/2" tabs wrapped on the leading edge of the mail piece and one 1-1/2" tab wrapped on the trailing edge of the product. This requirement can be met through the use of an in-line dual headed tabber assembled out of two independent tabbers. The biggest difference, besides requiring two tabbing heads, is the orientation of the mail product in the tabbers. The booklets must be run at 90 degrees when compared to the traditional folded self-mailer.

The Ameritek Jet1 design has been updated for improved operation in tabbing booklets to accommodate the new tabbing regulations.
The updates include:
Extended guides for enhanced product control
Tighter registration wheel assembly spacing for improved product control
Integrated base controls so one base "follows" the other
Updated head control firmware to allow close tab spacing with the required double tabbing on the leading edge
Modified base output and input sections to allow close spacing of bases. The tabbing system can easily be broken up into two fully functional independent tabbers with the removal of two integration brackets and cables.

SPECIFICATIONS

• Production Rate:(based on 8.5 Inch (216 mm) length product)
  • Single Tab: Up to 30,000 pieces per hour
  • Double Tab: Up to 24,000 pieces per hour
  • Triple Tab: Up to 18,000 pieces per hour
• Transport Belt:
  • 0 to 600 ft./min. (for tabs <2 Inch (50.8 mm) pitch)
  • 0 to 375 ft./min (for tabs >2 Inch (50.8 mm) pitch)
• Tabbing Head: 0 to 375 ft./min.
• MEDIA Size: 3 x 5 Inch (76 x 127 mm)- MAXIMUM: 13.5 x 17 Inch (343 x 432 mm)
• Thickness: Minimum: 20# single sheet / Maximum: 5/8 Inch
• Stock: Coated, bond, recycled, card
• TABS/LABELS Types: Tabs (single, double, triple), wafer seals, labels, stamps, repositionable notes, customized stickers, scratch-offs, machine grade paper and adhesive, clear, translucent, unperforated, vertical perforated.
• Note: Clear and translucent tabs require an “engineered backer” with registration marks for indexing.
• Roll Size: Up to 19.5 Inch (495 mm) diameter mounted on a 3 Inch (76 mm) core, up to 50,000 3/4 Inch (19 mm) tabs or 40,000 1 Inch (25 mm) tabs.
• Backer: 0.75 Inch (19 mm) to 2 Inch (50.8 mm) for standard head / .75 Inch (19 mm) to 4.5 Inch (114 mm) for wide head
• Label/Tab Length: 0.75 Inch (19 mm) to 7 Inch (178 mm)
• TAB PLACEMENT Accuracy: +/- 1/8 Inch repeatability
• PHYSICAL CHARACTERISTICS
  • Dimensions: 33 W x 37 D x 71 H Inch (940 x 838 x 1803 mm)
  • Tabletop Height: 34.75 Inch (883 mm) to 37.75 Inch (959 mm)
  • Weight: 350 lbs.
  • Power: 115V, Single phase, 10 amp
• CERTIFICATION: TUV, FCC
• OPTIONS: Available in standard or wide head configuration.

If you have any questions or concerns, contact a customer service representative today.
Phone: 877.336.6877 Visit: www.officeequipmentmachineshop.com

COVID Supply Chain Warning Due to global challenges including COVID and Climate Change affecting all businesses, prices are subject to change because of supply chain disruptions, shipping delays, labor shortages, material shortages, and inflationary pressures. If you place an order, and there is an increase in a price from that shown, we will alert you before processing the order.