Description

Keencut SteelTrak Cutter Head Assembly - SS31-008

Features :

• SteelTrak Cutting Head Complete with C2 Steel/Aluminium Composite Cutter and Multi Cutter Rotating Turret Arrangement

This Kit Includes :

• CA10-395 TW BACKING PLATE - 1
• CA10-399 RATCHET LEVER K - 1
• CA10-411 ST. HANDLE BRACKET - 1
• CA25-001 SMC629 COMPRESSION SPRING - 1
• CA25-080 COMP SPRING 7.62/17.5-.76 - 1
• CA25-178 AS2035 THRUST WASHER- INA - 1
• CA25-191 AXK2035 ROLLER TH/BEARING - 1
• CA25-294 ECCENTRIC STUD/NUT LFE8-1 - 2
• CA25-295 TRACK ROLLER LFR 50-8 - 4
• CA25-303 TAPERED FERRULE 16x20 int - 1
• CA25-306 4LOBE KNOB G732-50 M10x30 - 1
• CA25-354 6 IDx6 SPLIT SPACER TUBE - 1
• CA25-398 SQ.END FLAT SLEEVE - 1
• CA30-014 M6x8 METRIC SKT SET F/PT - 1
• CA30-015 M6x18 METRIC SOCKET CAPS - 1
• CA30-019 M5 FORM A ST. WASHER BZP - 4
• CA30-022 M6x14 METRIC SKT CAPS BZP - 1
• CA30-023 M6 METRIC THICK NYLOC BZP - 2
• CA30-029 1/4x3/4 MUDGUARD WSH. BZP - 2
• CA30-033 M6 FORM A WASHERS BZP - 3
• CA30-040 M6x22SKT CAPS - 1
• CA30-054 M10 FORM A WASHERS BZP - 1
• CA30-067 M8x30 SKT CAPS - 1
• CA30-304 M5x20 SKT. CAP BZP - 1
• CA30-075 M6 S/COIL SPR.WASHER BZP - 5
• CA30-118 M6x35 SKT S/CAP BZP - 3
• CA30-135 M5x14 CAP HEAD SKT SCREW - 1
• CA30-165 M6x12 BUTT SKT BZP - 1
• CA30-187 M6 DOMED NYLOC NUTS - 2
• CA30-188 M4x10 CSK SKT BZP - 5
• CA30-189 M6x40 BUTT SKT BZP - 2
• CA30-211 DISC SPRING 6.2/12.5-0.5 - 1
• CA30-221 DISC SPRING (8.2/18-0.7) - 4
• CA30-258 M5 DOME NYLOC NUT BZP - 1
• CA30-277 PLASTIC WASHER 10.5-20/2 - 1
• CA30-296 M6x55 SKT CAP F/THRD BZP - 1
• CA30-301 5x20 SOLID PIN - 1
• CA30-318 M8X25 SKT. BUTTON BZP - 2
• CA60-046 RPT21B400x250x150 - 1
• CA75-023 12 OD X 6 ID X 3mm N/R - 1
• CA75-009 M6 KNOBLET SSK4 BLK - 1
• CA75-053 PLASTIC WASHER 6.6-17.5/1 - 1
• CA75-064 23890 M8 BC 88mm HANDLE - 1
• CA75-127 SLIDE BEARINGS 6-9 - 3
• CA75-137 M6 RETAINING WASHER - 1
• CA75-157 STEELTRAK CUTTER GUARD - 1
• KS31-025 S/TRAK TW COMP.2 CUTTER - 1
• KS31-006 SWINGING ARM ASSEMBLY - 1
• KS31-104 SPRING BLOCK - 1
• KS31-113 CLAMPING DISC - 1
• KS31-115 THREADED INSERT - 1
• KS31-116 RUBBER BUFFER - 1
• KS31-117 RATCHET HOLD KNOB - 1
• KS31-124 CUTTER PLATE - 1

SteelTrak Spare Parts

Keencut SteelTrak Cutter Head Assembly - SS31-008
Keencut SteelTrak Squaring Arm Adjuster Assembly - SS31-014
Keencut SteelTrak LH Support Arm Assembly - SS31-015
Keencut SteelTrak RH Support Arm Assembly - SS31-016
Keencut SteelTrak Turret Assembly - SS31-023
Keencut SteelTrak Head Cover Assembly - SS31-024
Keencut SteelTrak Rachet Lever Kit - SS31-058
Keencut SteelTrak Cutting Head Handle Bracket Assembly - SS31-059
Keencut SteelTrak Cutter Return Spring Kit - SS31-061
Keencut SteelTrak Track Roller (full set) - SS31-062
Keencut SteelTrak ST165 (65”) Pulley & Cable Service Kit - SS31-063
Keencut Push rod & adjuster Assy (ST165, ST210, EXC5122, EXC5160, EXC3S) - SS31-065
Keencut SteelTrak 210cm Pulley & Cable Service Kit - SS32-063
Keencut SteelTrak 250cm Pulley & Cable Service Kit - SS33-063
Keencut Push Rod & Adjuster Assembly (ST250) - SS33-065
Keencut SteelTrak & Excalibur LH Squaring Arm Stop Assembly - SE01-010
Keencut SteelTrak & Excalibur RH Squaring Arm Stop Assembly - SE01-011
Keencut SteelTrak & Excalibur Clamp Housing/Handle Assembly - SE01-012
Keencut SteelTrak & Excalibur Pivot Housing Assembly - SS31-013

Compatible Keencut Cutters

SteelTraK Vertical Sheet Material Cutters
Keencut SteelTrak 65 Inch (1650 mm)Vertical Substrate Cutter - ST165 (Old Part # 60380)
Keencut SteelTrak 82 Inch (2083 mm) Vertical Substrate Cutter - ST210 (Old Part # 60385)
Keencut SteelTrak 98 Inch (2489 mm) Vertical Substrate Cutter - ST250 (Old Part # 60383)